Airtec Motorsport Auto Specialists Bolt-in Roll Cage Renault Megane RS 250/265/275 MK3 Colour:Natural Finish Borgwarner AirWerks S252SX-E Borgwarner AirWerks

Borgwarner AirWerks S252SX-E Borgwarner AirWerks S257SX-E Borgwarner AirWerks S361SX-E Borgwarner AirWerks S364SX-E Borgwarner AirWerks S366SX-E Borgwarner AirWerks S369SX-E  Owen Development GBT5473 Owen Development GBT5476 Owen Development GBT6179 Owen Developments GBT5463 Owen Developments GBT5465 Owen Developments GBT5468 Owen Developments GBT5471 Owen Developments GBT6171 Owen Developments GBT6173 Owen Developments GBT6176 Owen Developments GBT6182 Owen Developments GBT6976 Owen Developments GBT6979 Owen Developments GBT6982 Owen Developments GBT6986 Owen Developments GBT6988 Borgwarner Turbo EFR 6258-A 179150 Borgwarner Turbo EFR 6258-G 115898 Borgwarner Turbo EFR 6758-A 179388 Borgwarner Turbo EFR 6758-F 11589880034 Borgwarner Turbo EFR 6758-F(v) 11589880035 Borgwarner Turbo EFR 6758-G 11589880037 Borgwarner Turbo EFR 7064-B 179355 Borgwarner Turbo EFR 7064-C 179389 Borgwarner Turbo EFR 7064-D 179391 Borgwarner Turbo EFR 7163-F 11639880005 Borgwarner Turbo EFR 7163-F(v) 11639880006 Borgwarner Turbo EFR 7163-G 11639880002 Borgwarner Turbo EFR 7163-V AET-TBO-008 Borgwarner Turbo EFR 7670-B 179351 Borgwarner Turbo EFR 7670-C 179390 Borgwarner Turbo EFR 7670-D 179392 Borgwarner Turbo EFR 8374-B 179258 Borgwarner Turbo EFR 8374-C 179357 Borgwarner Turbo EFR 8374-D 179393 Borgwarner Turbo EFR 9180-B 179358 Borgwarner Turbo EFR 9180-C 12809880000 Borgwarner Turbo EFR 9180-D 179394

then the Valve Actuator Kit (P-HF985) is mandatory

NOTES : The CAN dash support was developed on a 2003 VW Beetle - other models may not be supported or have reduced dash functionality

including signals sent to the E-Gear ecu

840cm³ / Stock IC 510mm x130mm x110mm

Airtec Motorsport Auto Specialists Bolt-in Roll Cage Renault Megane RS 250/265/275 MK3 Colour:Natural Finish Borgwarner AirWerks S252SX-E Borgwarner AirWerksAuto Specialists have designed and released a bolt in roll cage for the Renault Megane III RS250 and 265 NO drilling or cutting required. Designed primarily for use as a show cage harness bar, these are a quick and easy fit retaining the use of original M10 seat belt mounting points. Constructed from FIA spec E355+N cold drawn seamless steel, aimed at strengthening and tightening the chassis in a simple and effective manner. No need for any additional