35MM X 5MM Seal 1/2" x 4" x 120"

1/2" x 4" x 120" AR400 Wear Bar

This is a V13 Syl Esco style Super V bucket tooth

This bolt on side cutter (can be welded on) is used on excavator buckets and has an industry standard part number of 096-4747 also known as e200bl

general purpose

This bolt on End Bit has an industry standard part number of T120978 and has 3 bolt holes

35MM X 5MM Seal 1/2" x 4" x 120"This steel bucket pin shim is for a pin with an outer diameter of 35 mm. It is 5 mm thick with an OD of 90 mm. Perfect for when you have space between your bucket ears and your machines hook up. Too much of a gap will cause your Bucket to wobble or chatter around on your machine causing wear and tear on your pins and bushings. A bucket pin shim will work just fine if it is a little larger than the Outer Diameter of your pin but not if it is smaller