90MM X 5MM Shims You will also need a

You will also need a 45lk lock

This is a cat j300 series style twin tiger bucket tooth with industry standard part number of 1u3302wtl or 135-9308

This is a 40pn pin for use with 40s series bucket teeth

This is a k290s steel pin for use with x290 series teeth

This is a solid case-hardened pin

90MM X 5MM Shims You will also need aThis steel bucket pin shim is for a pin with an outer diameter of 90 mm. It is 5 mm thick with an OD of 160 mm. Perfect for when you have space between your bucket ears and your machines hook up. Too much of a gap will cause your Bucket to wobble or chatter around on your machine causing wear and tear on your pins and bushings. A bucket pin shim will work just fine if it is a little larger than the Outer Diameter of your pin but not if it is smaller